Repros

We can make parts for rare vehicles with a small number of existing units by one-off from one piece and a manufacturing method specialized for small lots (tens of pieces).

Generally, expensive molds are required to manufacture plastic and rubber parts.

It is best if you make tens of thousands of the same parts,
How many old vehicles are left ...
Moreover, it is not a manufacturing method that individual old car riders can easily handle.

Therefore, we will create a simple mold and manufacture the necessary parts.

Since it is a simple mold, the durability of the mold itself is low, so it is suitable for manufacturing 1 to 10 parts.

​ The main specific examples that can be manufactured are as follows. ​

​ ● Clear lenses (It is not a common duplication method with epoxy resin etc.
Since it is not white, it will not whiten immediately. )

● Plastic parts
Elastic parts such as ABS and high strength such as engineer plastics can also be achieved.

● Rubber parts We can make high-strength urethane rubber to oil-resistant rubber.
You can also specify the hardness of the rubber.

● Electrical harness For details, see the " Rewiring " page.


* The amount will change depending on the size and shape of the product and the condition of the master parts you can deposit, so please feel free to contact us.

For inquiries by email,

・ Number of pieces you want to make ・ Rough size in 3 directions (length x width x height)
・ It's easy, so the whole picture

We would appreciate it if you could fill in ​.